Subcontractor Insurance in Tennessee

Subcontractor Insurance Tennessee for GCs and Trades

Subcontractor Insurance Tennessee: What Jobs Actually Require

Subcontractor insurance in Tennessee is the coverage a trade contractor carries so a general contractor, project owner, or construction manager will let them on the job site. It is also the paperwork a GC uses to show insurance compliance when an owner, lender, or auditor asks who is covered. Coverage is always subject to policy terms, limits, deductibles, and exclusions.

Knoxville Insurance Store is a member of the Home Builders Association of Greater Knoxville (HBAGK). We work within Knoxville's home-building community and help subcontractors get the general liability, workers compensation, and certificate paperwork general contractors and project owners typically require. Coverage is always subject to policy terms, underwriting, and licensing.

Get a Subcontractor Insurance Quote

Knoxville Insurance Store, also known as IRM Insurance, is an independent agency at 11002 Kingston Pike Suite 103, Knoxville, TN 37934. We help subcontractors get the policies and certificates they need, and we help general contractors think through what to require and how to check it. Call 865-579-0500 or email info@knoxvilleinsurancestore.com. Hours are Monday through Friday, 9:00 AM to 5:00 PM, closed weekends.

This hub sits with our contractor insurance page. For a longer walkthrough of typical contract wording, see our blog on subcontractor insurance requirements in Knoxville and East Tennessee. That article supports this page; this is the main service page to use when you want a quote.

What GCs Require From Subs

Contract requirements vary by project, but most general contractors in Tennessee ask subcontractors to show some mix of the following, with coverage limits spelled out in the subcontract:

  • Commercial general liability insurance, often $1,000,000 per occurrence and $2,000,000 aggregate, sometimes more on larger jobs
  • Workers compensation coverage for employees, or proof of a valid exemption for a qualifying owner who truly has no employees
  • Commercial auto insurance if the sub drives to the job or hauls materials
  • Tools or inland marine coverage for equipment, when the GC or the sub wants that protection
  • Umbrella or excess liability coverage when the contract calls for limits above the primary policies
  • Additional insured status for the GC and often the owner, plus a waiver of subrogation, when the contract requires those endorsements
  • A current certificate of insurance, and sometimes a copy of the endorsement, not just a certificate

A GC should not treat a certificate as a policy. The certificate is evidence of insurance coverage. The actual insurance policies and endorsements control what is covered.

General Liability Insurance, Coverage Limits, and Additional Insured Wording

General liability insurance is usually the first policy a GC will require. Subject to policy terms, general liability can help with bodily injury and property damage claims tied to the subcontractor’s work - including certain job site injuries to third parties and damage to the project or neighboring property, depending on the form and exclusions.

Additional insured status is meant to give the general contractor and, often, the project owner certain rights under the subcontractor’s policy, subject to the endorsement and the policy. A waiver of subrogation, when the carrier agrees to it, limits the insurer’s right to recover from the party named in the waiver after a covered loss. These are not automatic. They have to be requested, approved, and listed correctly.

When we issue certificates, we work from the contract language you send us and from what the carrier will actually grant. If a GC requires wording the policy cannot support, it is better to know that before you mobilize.

Workers Compensation, Job Site Injuries, and Uninsured Subs

Workers compensation coverage is a separate policy. It does not fall under general liability or an umbrella policy. Subject to policy terms and Tennessee law, it is the coverage that responds to job related injuries for employees.

Tennessee treats construction employers more strictly than many other businesses. Construction services providers with one or more employees are required to carry workers compensation for those employees, including part-time, seasonal, family, and as-needed help. That is the official position of the Tennessee Bureau of Workers’ Compensation.

If a sub is uninsured and a worker is hurt, the problem does not always stop with the sub. The Bureau’s certificate of insurance page states that Tennessee law allows a worker employed by an uninsured subcontractor who is injured on the job to go “up the ladder,” meaning they can hold the general contractor responsible for compensation. That rule is also set out in Tennessee Code Annotated § 50-6-113. We are not giving legal advice; read the statute and the Bureau’s guidance, and talk with counsel when a claim is in dispute.

The same official page notes that, in addition to Bureau penalties, employers could face charges in audits performed by the insurance carrier. In a workers compensation audit, uninsured subcontractor payroll is often picked up and rated as if it were the GC’s own payroll. Keep certificates current and verify active coverage so a year-end audit is not the first time a gap shows up.

Commercial Auto Insurance, Tools, and Umbrella Coverage

Commercial auto insurance covers business vehicles, subject to policy terms. If a sub’s crew drives to the job site or hauls materials, GCs often require auto liability and a certificate that lists it.

Tools, hand tools, and larger equipment are usually insured on an inland marine or equipment floater, not on the general liability policy. Umbrella or excess liability coverage adds an extra layer of limits over the primary general liability and, sometimes, auto policies when the contract requires higher coverage limits.

Professional liability may matter if the sub designs, stamps, or gives professional advice, not only if they install.

Same-Day COIs and What a Good Certificate Shows

A certificate of insurance is how insurance compliance gets documented on a construction project. The Bureau’s COI guidance says a copy of the COI must be kept at the employer’s place of business and on all job sites, and that general contractors need to keep copies of the COIs of all their subcontractors in addition to their own.

The Bureau also advises contractors not to accept a COI directly from another contractor if the goal is to avoid fraudulent documents; confirm coverage with the insurance agent. Out-of-state contractors need Tennessee listed in item 3A of the workers compensation policy, which does not appear on the certificate itself, so that check has to happen with the agent or carrier.

A good COI typically shows:

  • The correct legal name of the insured, matching the subcontract
  • The coverage types the contract requires, with coverage limits and policy numbers
  • Effective and expiration dates that cover the work period
  • The certificate holder listed correctly
  • Additional insured or waiver language only when the policy actually provides it
  • The producer’s contact information so the GC can verify active coverage

Knoxville Insurance Store issues certificates as soon as the policy is in force and the request is clear, often the same day, subject to the carrier. We can also help a GC review what a sub’s certificate actually shows.

The Bureau mentions Form I-15, which allows a subcontractor, with the agreement of the general contractor, to be covered by the GC’s workers compensation insurance, with premiums withheld from the sub’s pay. That is a formal election, not a shortcut around checking certificates.

The Tennessee Construction Services Provider Workers Comp Exemption

Eligible construction business owners can apply to exempt themselves from the requirement to carry workers compensation on themselves. That is the Tennessee Workers’ Compensation Exemption Registry, administered by the Bureau of Workers’ Compensation - not a blanket exemption for the company.

The Bureau is clear: exempt owners are still required to have insurance coverage for all of their employees, even if they have only one employee. An exemption covers only the individual listed on the exemption; it does not cover the entire business or any of their employees.

Official frequently asked questions on the Bureau’s exemption forms page describe who can qualify. In summary, an applicant must be an individual who is:

  • A sole proprietor who owns 100% of the assets of the business, or
  • An officer of a corporation, or
  • A member of an LLC with at least a 20% ownership interest, or
  • A partner in a partnership with at least a 20% ownership interest, or
  • An applicant whose family, together with the applicant, holds at least 95% ownership of the business

A business entity cannot apply. Registration is only available to individual owners. Effective October 1, 2011, each corporation, LLC, or partnership may have up to five individuals who qualify to be exempt; a sole proprietor can have only one exemption.

Fees, as published by the state

The Bureau’s support article “Are there fees associated with the exemption?”, updated February 5, 2026, lists these filing fees:

  • Initial exemption with an active contractor’s license issued by the Board for Licensing Contractors: $50.00
  • Initial exemption without that license: $100.00, which includes Construction Services Provider registration and the initial exemption registration
  • Each subsequent workers’ compensation exemption registration: $20.00

Fees can change. Confirm the current amount and file through the official Exemption Registry or the instructions on tn.gov. Questions can go to wc.exemption@tn.gov or 615-532-1319.

We help contractors understand how an exemption interacts with a workers compensation policy and with what a GC will accept. We do not process the state’s application and we do not give legal advice.

How a General Contractor Checks a Sub on the Exemption Registry

The registry is a public list of people who have been granted an exemption. A GC can search the Workers’ Compensation Exemption Registry and view general information about an exemption registration.

The Bureau also points contractors to a coverage verification tool when checking whether a sub has a workers compensation policy. When you verify, remember:

  • An exemption covers only the named person, not their crew
  • A listed exemption “in no way reflects the validity of their license or certification status,” in the Bureau’s words
  • You still want a current COI for general liability, auto, and any other required lines
  • Confirm coverage with the sub’s agent rather than relying only on a PDF the sub emailed

If the sub has employees and only an owner’s exemption, the GC still has a workers compensation gap to resolve before that crew starts.

We write contractor coverage by trade, then issue the certificates GCs require:

Licensed Contractors, Bonds, and How Tennessee Differs From Most States

General liability insurance is required for licensed contractors by the Tennessee Board for Licensing Contractors, at the minimums tied to the monetary limit. Many contracts still ask for higher limits than those minimums.

Tennessee also requires a $10,000 surety bond (or an allowed alternative) for a home improvement license in the counties that have adopted that law, including Knox County. See the Board’s home improvement page for the current county list and bond rules.

In most states, workers compensation for a subcontractor often turns on whether the sub has employees, and the exact threshold varies. Tennessee construction is stricter than that general pattern: construction services providers generally need coverage for employees beginning with the first one. We will not use another state’s rule as a shortcut here. Confirm the current Tennessee requirement with the Bureau, and let us help with the policy and the certificate.

Insurance Coverage, Insurance Compliance, and Bodily Injury on the Job Site

Most subcontractors need their own coverage, not a verbal promise that they are “covered under the GC.” Insurance compliance is how you protect the job after an accident: general liability for bodily injury tied to the work, workers compensation for medical bills and lost wages, and commercial auto when vehicles are on the project. Legal fees and legal costs can follow a claim even when the facts are disputed, subject to policy terms. Umbrella coverage is the usual way to raise limits when the contract demand is higher than the primary policy. The cost of letting coverage lapse is not only the premium; it can include audit charges, delayed reimbursement, and a lost right to complete the work. In most cases, the GC will verify with the subcontractor’s insurer rather than taking a stale PDF at face value. We compare options from multiple carriers and help Tennessee contractors keep those core coverages current.

Get Coverage and Certificates in Place

Call 865-579-0500 or email info@knoxvilleinsurancestore.com with the subcontract’s insurance exhibit, or with the list of trades you hire. We compare options, bind coverage, and help with additional insured and waiver requests the carrier will support.

If you are nearby, stop in at 11002 Kingston Pike Suite 103. Fiona, our black German Shepherd office dog, is often here, and there is usually a jar of Black Dog Honey Reserve from Lisa’s own hives for customers.

Frequently Asked Questions

Does the Tennessee workers comp exemption cover my employees?
No. Official Bureau guidance says the exemption applies to the qualifying owner who is listed, not to employees or to the business as a whole. Employees still need workers compensation coverage.

How does a general contractor check a sub on the Exemption Registry?
Search the public Exemption Registry. Also verify any workers compensation policy with the sub’s agent, and remember that an exemption does not replace general liability or auto certificates.

What should a good certificate of insurance show?
The correct insured name, the required coverage types and coverage limits, current effective and expiration dates, the right certificate holder, and endorsement wording only when the policy actually provides it.

Can you issue a COI the same day?
Often yes, once the policy is in force and we have the holder and wording details, subject to the carrier.

What is “up the ladder” liability in Tennessee?
The Bureau explains that a worker employed by an uninsured subcontractor who is injured on the job can hold the general contractor responsible for compensation. See the Bureau’s COI page and T.C.A. § 50-6-113. That is not a substitute for legal advice on a specific claim.

Can a general contractor be charged at audit for an uninsured sub?
The Bureau notes that employers could face charges in audits performed by the insurance carrier, in addition to possible Bureau penalties. Many workers compensation audits pick up uninsured sub payroll. Keep certificates and exemption checks in the file.

Do subcontractor insurance requirements vary by project?
Yes. State law sets a baseline, especially for workers compensation in construction. Individual contracts often require higher limits, additional insured status, waivers, and auto coverage. We read the exhibit with you.

Can a GC withhold payment if a sub’s insurance lapses?
That depends on the subcontract and on the facts. We can help get coverage and an updated certificate back in place; contract payment questions belong with your attorney.

Get a Subcontractor Insurance Quote